Ergopouch Drift Home Baby Monitor and Smart TOG Guide
A no Wi-Fi Baby Monitor, the only of its kind in the market to use a built-in Smart TOG Guide to make real-time dressing recommendations.
Easy to set up and intuitive to use, Drift Home is thoughtfully designed to help you navigate safe sleep and build confidence in those precious early days (and beyond).
Introducing the ergoPouch Drift Home Baby Monitor and Smart TOG Guide, a one-of-a-kind baby monitor designed with both parents and little ones in mind. Created by the experts in baby sleepwear, you can connect multiple cameras (up to 4) to your Drift Home monitor
Drift Home reads the temperature of your baby’s room, and uses the built-in Smart TOG Guide (the digital version of our famous What to Wear Guide) to make real-time, personalised TOG-rated recommendations on how to dress your baby for sleep. It offers a clear, simple, and safe solution, giving you the confidence to step out of the room while still staying connected. Drift Home does not use WiFi to prioritise your family’s privacy and safety from hackers.
Learn more about Drift Home here.
Materials
Shell: Plastic
Care
Do not wash, wipe with damp cloth if it gets dirty.
Do not take outside if you can avoid it.
Do not place in wet areas like bathroom and near a dryer
There is a one-year warranty on your Drift Home Purchase. If anything does happen to your new monitor, please return it to the retailer you purchased it from with a proof of purchase receipt.
Size
Monitor Sizing
Screen size: 5 inch
Length: 16.6cm / 6.5"
Height: 8.7cm / 3.4"
Width: 1.8cm / 0.7"
Camera Specifications
Length: 8.7cm / 3.4"
Height: 10.2cm / 4"
Width: 9.7cm / 3.8"
Drift Home Safety Manual
Warnings
Do not place near heat, flame, water or damp areas or areas with high condensation.
The Drift Home Baby Monitor and Smart TOG Guide is not a medical device, and is not a substitute for safe sleep practices or the oversight of an adult. Please ensure you follow safe sleep practices when putting your baby to sleep, including the safe positioning of the camera in the baby’s sleep area.The TOG Dressing Guide is intended as a guide only, and is based on using ergoPouch TOG rated products. When following the guide, please consider other factors such as illness, changes in room temperature over time, whether your baby tends to run warmer or cooler in general, and if you are using other brands' sleepwear products.
Fire Hazard Label
N/A
1. Charging & Powering Monitor
· Connect the monitor adapter to the monitor and a power outlet.
· Unplug the unit when its power indicator turns off, indicating a full charge.
2. Powering Camera Connect the camera to power source via the USB type-C cable and
camera adapter.
· Only use the power adapters included in the package.
· Do not place the camera and power cord within the reach of your
baby.
3. Pairing the Monitor & the Camera
· By default, one camera has been paired with the monitor when manufactured.
· When you power on the monitor and camera, the two will automatically pair.
· To add more cameras, press the Pair Button at the bottom of the camera, press Menu button, select through -> -> , and then the monitor will auto-pair with the camera.
· Once they’re paired successfully, the camera number with icon will be shown at the top left.
· Microphone feedback noise might occur when the monitor is too close to the camera. Please keep them at least 1.5m / 4.9ft apart.
· It is recommended to pair in the baby's room, or wherever you intend to place the camera.
It's strongly recommended to use a screw and screw anchor. Don't release the camera until you're sure it is firmly mounted.
4. Placing the Camera
· Place the camera 1.5-2m / 4.9-6.6ft away from your baby for safety reason
and for a better view when in night vision mode.
5. Wall Mounting Camera
· Select the spot to mount the camera, keeping it beyond your baby’s reach.
· Use the screw bag to fasten the bracket on the wall, and screw the camera into the bracket
For more information, view our How to Use page.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Ergopouch Drift Home Baby Monitor and Smart TOG Guide
Ergopouch Drift Home Baby Monitor and Smart TOG Guide
A no Wi-Fi Baby Monitor, the only of its kind in the market to use a built-in Smart TOG Guide to make real-time dressing recommendations.
Easy to set up and intuitive to use, Drift Home is thoughtfully designed to help you navigate safe sleep and build confidence in those precious early days (and beyond).
Introducing the ergoPouch Drift Home Baby Monitor and Smart TOG Guide, a one-of-a-kind baby monitor designed with both parents and little ones in mind. Created by the experts in baby sleepwear, you can connect multiple cameras (up to 4) to your Drift Home monitor
Drift Home reads the temperature of your baby’s room, and uses the built-in Smart TOG Guide (the digital version of our famous What to Wear Guide) to make real-time, personalised TOG-rated recommendations on how to dress your baby for sleep. It offers a clear, simple, and safe solution, giving you the confidence to step out of the room while still staying connected. Drift Home does not use WiFi to prioritise your family’s privacy and safety from hackers.
Learn more about Drift Home here.
Materials
Shell: Plastic
Care
Do not wash, wipe with damp cloth if it gets dirty.
Do not take outside if you can avoid it.
Do not place in wet areas like bathroom and near a dryer
There is a one-year warranty on your Drift Home Purchase. If anything does happen to your new monitor, please return it to the retailer you purchased it from with a proof of purchase receipt.
Size
Monitor Sizing
Screen size: 5 inch
Length: 16.6cm / 6.5"
Height: 8.7cm / 3.4"
Width: 1.8cm / 0.7"
Camera Specifications
Length: 8.7cm / 3.4"
Height: 10.2cm / 4"
Width: 9.7cm / 3.8"
Drift Home Safety Manual
Warnings
Do not place near heat, flame, water or damp areas or areas with high condensation.
The Drift Home Baby Monitor and Smart TOG Guide is not a medical device, and is not a substitute for safe sleep practices or the oversight of an adult. Please ensure you follow safe sleep practices when putting your baby to sleep, including the safe positioning of the camera in the baby’s sleep area.The TOG Dressing Guide is intended as a guide only, and is based on using ergoPouch TOG rated products. When following the guide, please consider other factors such as illness, changes in room temperature over time, whether your baby tends to run warmer or cooler in general, and if you are using other brands' sleepwear products.
Fire Hazard Label
N/A
1. Charging & Powering Monitor
· Connect the monitor adapter to the monitor and a power outlet.
· Unplug the unit when its power indicator turns off, indicating a full charge.
2. Powering Camera Connect the camera to power source via the USB type-C cable and
camera adapter.
· Only use the power adapters included in the package.
· Do not place the camera and power cord within the reach of your
baby.
3. Pairing the Monitor & the Camera
· By default, one camera has been paired with the monitor when manufactured.
· When you power on the monitor and camera, the two will automatically pair.
· To add more cameras, press the Pair Button at the bottom of the camera, press Menu button, select through -> -> , and then the monitor will auto-pair with the camera.
· Once they’re paired successfully, the camera number with icon will be shown at the top left.
· Microphone feedback noise might occur when the monitor is too close to the camera. Please keep them at least 1.5m / 4.9ft apart.
· It is recommended to pair in the baby's room, or wherever you intend to place the camera.
It's strongly recommended to use a screw and screw anchor. Don't release the camera until you're sure it is firmly mounted.
4. Placing the Camera
· Place the camera 1.5-2m / 4.9-6.6ft away from your baby for safety reason
and for a better view when in night vision mode.
5. Wall Mounting Camera
· Select the spot to mount the camera, keeping it beyond your baby’s reach.
· Use the screw bag to fasten the bracket on the wall, and screw the camera into the bracket
For more information, view our How to Use page.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A no Wi-Fi Baby Monitor, the only of its kind in the market to use a built-in Smart TOG Guide to make real-time dressing recommendations.
Easy to set up and intuitive to use, Drift Home is thoughtfully designed to help you navigate safe sleep and build confidence in those precious early days (and beyond).
Introducing the ergoPouch Drift Home Baby Monitor and Smart TOG Guide, a one-of-a-kind baby monitor designed with both parents and little ones in mind. Created by the experts in baby sleepwear, you can connect multiple cameras (up to 4) to your Drift Home monitor
Drift Home reads the temperature of your baby’s room, and uses the built-in Smart TOG Guide (the digital version of our famous What to Wear Guide) to make real-time, personalised TOG-rated recommendations on how to dress your baby for sleep. It offers a clear, simple, and safe solution, giving you the confidence to step out of the room while still staying connected. Drift Home does not use WiFi to prioritise your family’s privacy and safety from hackers.
Learn more about Drift Home here.
Materials
Shell: Plastic
Care
Do not wash, wipe with damp cloth if it gets dirty.
Do not take outside if you can avoid it.
Do not place in wet areas like bathroom and near a dryer
There is a one-year warranty on your Drift Home Purchase. If anything does happen to your new monitor, please return it to the retailer you purchased it from with a proof of purchase receipt.
Size
Monitor Sizing
Screen size: 5 inch
Length: 16.6cm / 6.5"
Height: 8.7cm / 3.4"
Width: 1.8cm / 0.7"
Camera Specifications
Length: 8.7cm / 3.4"
Height: 10.2cm / 4"
Width: 9.7cm / 3.8"
Drift Home Safety Manual
Warnings
Do not place near heat, flame, water or damp areas or areas with high condensation.
The Drift Home Baby Monitor and Smart TOG Guide is not a medical device, and is not a substitute for safe sleep practices or the oversight of an adult. Please ensure you follow safe sleep practices when putting your baby to sleep, including the safe positioning of the camera in the baby’s sleep area.The TOG Dressing Guide is intended as a guide only, and is based on using ergoPouch TOG rated products. When following the guide, please consider other factors such as illness, changes in room temperature over time, whether your baby tends to run warmer or cooler in general, and if you are using other brands' sleepwear products.
Fire Hazard Label
N/A
1. Charging & Powering Monitor
· Connect the monitor adapter to the monitor and a power outlet.
· Unplug the unit when its power indicator turns off, indicating a full charge.
2. Powering Camera Connect the camera to power source via the USB type-C cable and
camera adapter.
· Only use the power adapters included in the package.
· Do not place the camera and power cord within the reach of your
baby.
3. Pairing the Monitor & the Camera
· By default, one camera has been paired with the monitor when manufactured.
· When you power on the monitor and camera, the two will automatically pair.
· To add more cameras, press the Pair Button at the bottom of the camera, press Menu button, select through -> -> , and then the monitor will auto-pair with the camera.
· Once they’re paired successfully, the camera number with icon will be shown at the top left.
· Microphone feedback noise might occur when the monitor is too close to the camera. Please keep them at least 1.5m / 4.9ft apart.
· It is recommended to pair in the baby's room, or wherever you intend to place the camera.
It's strongly recommended to use a screw and screw anchor. Don't release the camera until you're sure it is firmly mounted.
4. Placing the Camera
· Place the camera 1.5-2m / 4.9-6.6ft away from your baby for safety reason
and for a better view when in night vision mode.
5. Wall Mounting Camera
· Select the spot to mount the camera, keeping it beyond your baby’s reach.
· Use the screw bag to fasten the bracket on the wall, and screw the camera into the bracket
For more information, view our How to Use page.
